The Ohio Department of Natural Resources is seeking a contractor to install a pump and piping at Hocking Hills State Park Well #3. The contractor will be responsible for installing a pitless adapter, pump, wire, check valves, and pipe into the well, as well as performing an EPA-required 24-hour pump test and submitting water samples to the EPA. The contractor must also install torque arrestors, connect the pitless adapter to a 4-inch C 900 pipe, and connect the wire from the pump to a junction box. The contractor will be required to provide all necessary equipment and supplies, including a camera to inspect the well. The project must be completed within 60 days of the executed contract, and the contractor must ensure that all equipment used on-site is free of sediment and debris to minimize the introduction of invasive species. • The project requires the installation of a pitless adapter, pump, wire, check valves, and pipe into the well. • The contractor must perform an EPA-required 24-hour pump test and submit water samples to the EPA. • The contractor must install torque arrestors and connect the pitless adapter to a 4-inch C 900 pipe. • The contractor must connect the wire from the pump to a junction box. • The contractor must provide all necessary equipment and supplies, including a camera to inspect the well. • The project must be completed within 60 days of the executed contract. • The contractor must ensure that all equipment used on-site is free of sediment and debris to minimize the introduction of invasive species.